This is the semi-scale version of the Czech aerobatic glider LF - 107 LUŇAK. The LUŇAK was built in the early 50's, in the Czech Rep. It was used as a trainer for future jet pilots or in local clubs for sailing and aerobatics. It had very impressive flying characteristics with a win at the World Championship. Only 5 units are still inventoried around the world from over 200 built. The model is one of THE MOST AEROBATIC scale gliders available, capable of full on, hardcore aerobatics. The LUŇAK is suitable for slope flying, aerotow or ROG winching.

This is a quality model, designed to look great, and fly even better. It was awarded "The Model of the Year 2002" at Model Hobby Fair in Prague. That is quite an accomplishment with the competition.

Flying the Lunak is like no other... it responds instantly, has a fast roll rate, and hold it's energy amazingly well. It is deceptively fast, but still a sweetheart to land. She has loads of flaps (full span) so you can camber for lift and speed. Check out this awesome video of the LUNAK at Kiona Butte in WA. The winds were only 10-15! BUT HOLD ON!

Aerotow is a dream too. It is very mild mannered on tow, but puts on one heck of a show on the way down. It's also been known to catch a few thermals.

Airframe Features:

• High Gloss Painted Fiberglass fuselage
• Two-pieces foam/balsa wing (STRONG!)
• Fiberglass leading edge
• Wing joiner located in the middle of fiberglass spar
• Wing supported by carbon stripes and fiberglass under the balsa cover. Although
  the wing is not made from fiberglass, it has similar characteristics of stiffness,
  still being very light
• Ailerons and wing flaps fall into two parts - 6 of them
• Clear canopy
• High quality Oracover on wings and balsa tail parts
• Expertly applied covering, with all seams hand-sealed
• Includes all necessary hardware
• Scale Fixed landing gear

Radio requirements:

• We recommend at least a 3300 Mah 4 cell pack for all the servos.
• 6 x HS-225MG (or similar torque servo)
• 2 x HS-645MG (or similar torque servo)