Pulsar PRO 3200 E

The  Pulsar Pro 3200 E improves on the success of the Pulsar 2008 with a larger wing, lower wing loading, and the same quality craftsmanship that you have come to expect in the Pulsar series.

The three piece wing is extremely light but very strong through the use of a kevlar/carbon woven cloth D-box leading edge, with carbon capped ribs and a carbon trailing edge. The ailerons and flaps are pre-hinged with integral shrouds fitted to the flaps allowing for very effective crow braking (great way to scrub altitude and nail the spot landings!).

The  Pulsar Pro 3200 E  is well balanced in more ways than one. She has a generous wing that is extremely light, yet would be strong enough to handle winch launches, for whatever reason. The  Pulsar Pro 3200E  also sports removable tail planes to match the 3 piece wing, making transportation a breeze.

Normally we would tell you that if you wanted better quality, or better fit and finish, in a built up model that you would have to do it yourself. Unfortunately, after holding the Pulsar in your hands, you'll agree that even building it yourself isn't going to top this quality.

Give us a call or e-mail us with any ordering or technical questions, we'll be happy to help you make the right equipment choices.

For the ultimate in ALES or LMR competition model:

Recommended Gear:
Motor: Neutron 707 2y 6.7 (P29) or Neu 1105 2.5y 6.7 (P29)
ESC: Castle Creations Edge Lite 50
Prop:  RFM 15.5 x 10 or RFM 16x10
Spinner: RFM Spinner 38/6mm
Servo: MKS DS6100 all around
Battery: Thunder Power 65C LiPo 1800 3S

Also available as Glider