The MKS DS-6125H is part of the latest range from MKS.
Once you have tried MKS, you will know you have tried the very best!
Never has a glider servo been so accurate and tight! This is what we all have been searching for!!
The DS-6125H has a full CNC Aluminum case that has been milled to the highest of tolerances.
- Dead band: 0.001ms (Default)
Control System: +Pulse Width Control
Working frequencie: 1520Î¼s / 333hz
(RX) Required Pulse: 3.0~5.0 Volt Peak to Peak Square Wave
Operating Voltage: 4.8~6.0 V DC Volts
Operating Temperature Range: -10 to + 60 Degree C
Operating Speed (4.8V): 0.12 sec/60Â° degrees at no load
Operating Speed (6V): 0.1 sec/60Â° degrees at no load
Stall Torque (4.8V): 4.2 kg-cm ( 58.33 oz/in)
Stall Torque (6V): 5.2 kg-cm ( 72.21 oz/in)
360Â° Modifiable: YES
Motor Type: DC Motor
Potentiometer Drive: Direct Drive
Driver Type: FET
Bearing Type: Dual Ball Bearings
Gear Type: Chrome gear
Connector Wire Length: 15.0 cm (5.89 in)
Dimensions: 30x10x28.7 mm (1.1811X0.39X1.13 in)
Weight: 24.33g (0.85oz)
Destruction of properties: In the 18 ~ 22 kg-cm moment of impact more than three times, the gear will start to slip (push pull at this time there are 3 ~ 5kg/cm); 23 kg-cm instant hit, Gears of collapse.