Vortex 4 F3K DLG

The Vortex 4 is a high end DLG, based on modified Synergy 2 high performance airfoils and a wing area of just 20 dm. The Vortex 4 has been optimized for high launch and easy handling to allow the pilot to use the softest lift with maximal efficiency and the greatest of ease. The Vortex 4 F3K has incredibly flat glide and low sink rate and reacts very well to both camber and ballast. Easy field assembly with the fork style arms for the flaps and a plug and play system for the ailerons in a 2pc wing.

The Vortex 4 is one of the easiest models to build with a 4 in a pod design which allows easy assembly and disassembly of servos in case of maintenance requirements. The Vortex 4 comes with a high level of pre-fabrication to reduce the build time to just a short few hours. Aileron wiring is already installed. The nose of the vortex is designed to take a wide variety of servos, batteries and receivers in a “side by side” configuration for the receiver and battery and a 2×2 configuration for the servos. The Vortex 4 supports many servo types such as MKS 75 and 65 and more.

The Vortex 4 is super easy to assemble at the field with its auto-mating flap linkage system, just mount the wing on the fuselage, plug the aileron plug and fly, no hassle with linking the push rods or connectors. The Vortex 4 is available in a one or two-piece wing configuration. The two-piece wings requires NO TAPE for assembly at the field and fits right and left hand throwers alike.vClick, mount, and fly your Vortex 4 in just a couple of minutes!

Give us a call or e-mail us with any ordering or technical questions, we'll be happy to help you make the right equipment choices.

• Easy, quick build
• High launches
• Easy handling with great L/D performance

Recommended battery: 1-cell 1000mAh LiPo

Recommended servos (4): MKS DS75K Tail and Flaps, (2) MKS DS65K for the Ailerons

We also have bags for an additional charge.