Vixen 2 F5J X-tail

Vixen 2 is a X-tail electric sailplane for F5J /LMR/ALES competition or sport flying available in three layups: Standard, Strong (windy), and Competition. You're going to fall in love with this easy to tune and fly high performance glider.

  • Wingspan
    144 in. (3.68m)
  • Wing Area
    1169 sq.in. (75.42dm2)
  • Airfoil
    Proprietary-modified JW transitioning to modified Drela sections
  • Length
    68 in. (1.72m)
  • Weight
    42-50oz AUW
  • Motor type
    Neu 1102/3y/6.7 gear motor
  • Battery config
    3s LiPo
  • Options
    Standard, Strong, Competition
  • $1599.95
Qty:  
OR

Vixen 2 F5J X-tail

The Vixen 2 F5J is a proven model with an exceptional design pedigree.

By popular demand, we now offer an X-tail, 4pc wing, 2pc fuse compact version of the highly successful V-tail original!

The JW/Drela/DP wing section/planform is a good looking, great performing model that is perfect for F5J. The redesigned wing has been changed to a 4-servo design, but if you wish, there is an outer-tip servo bay in the wing for 6 servos. The wing has factory installed LDS linkages.

The large X-tail works very well at low speed, and with the polyhedral wing, and long tail moment, it translates to a very stable, predictable flying model that's very easy to tune up and reach maximum flight performance. 

The signature Daryl Perkins inspired pre-hinged canopy on the Vixen 2 is a nice touch giving you easy access to all of your electric drivetrain components. In a very short time, you’ll be in the air, and you'll realize what an amazing world class F5J sailplane this is. Give us a call or e-mail us with any ordering or technical questions, we'll be happy to help you make the right equipment choices.

The Vixen 2 comes with:

  • Hardware
  • Pushrods installed wing/supplied for fuse
  • Wing bags/tail bags
  • LDS installed-flush mount
  • Canopy hinges installed
  • Ballast tubes in wing for up to 24 oz. of 9/16 ballast

The Vixen 2 F5J comes in three layups:

  1. Standard-Glass/carbon
  2. Strong (windy)-C68gsm Carbon
  3. Competition Strong/Lite (pictured)-Carboline 37gsm

Suggested Power Setup:

Motor: NeuMotor 1102/3.5Y/5.8 (P22)

Spinner: GM 30/6mm Spinner

Prop: GM 14x8 Prop

ESC: CC Phoenix EDGE Lite 50

Battery: Tattu Battery 850mAh 3S 75C Lipo

Suggested Accessories:

Servos: MKS HV6100 MG six to eight are needed

Servo Frames: Servo Frames for DS6100 servos with bearings (pair), order two or more pairs

Firewall: PNC Alum Firewall 30mm for P22 or Powerline, one needed


Previous image
Vixen 2 F5J X-tail
Next image
Zoom image
Customers who bought this product also bought
Customers who viewed this product bought