Micro Max 1.15m

The concept was inspired by Henning Plemo Schmidt, with aero design by Christophe Bourdon. Structural design and implementation is by Anton Ovcharenko so this model is of the highest pedigree. Its inspiration was the lack of high performance small gliders optimized for fast slope flying. 

The Micro Max is 1.15m “45" wingspan features technology from F3K construction. Solid core machined rohacell foam cores in the wing and tail sections with a bladder molded fuselage. V-tail linkage are simple "L" bends which make removal of the tails a breeze. Ailerons are "top drive" linkage and horns. 

Recommended servos are the CHAServo DS06 for the wing and for the tails. There is a cutout in the wing saddle of the fuse to allow for ballast. Recommended battery is a 600mah 2S lipo and a small 5-6 channel receiver. Give us a call or e-mail us with any ordering or technical questions, we'll be happy to help you make the right equipment choices.

Specifications- 

• Wingspan: 115 cm 
• Length: 74 cm 
• Chords: 143mm/125mm/10mm 
• Wing area: 13.5 dm2 
• Construction: Rohacell and Carbon 40g/dm2 UHM wings, IMS Carbon fuselage 

 Suggested settings from Pierre Meunier- 

• My settings : (+) = up (-) = down 
• Ailerons : +11 mm -13 mm 
• Elevator : +5 mm -5mm 
• Rudder : +4 mm -4 mm 
• Snap flap +1.5 -3 mm 
• Flight modes : 
• Speed : ailerons +0.5 mm 
• Normal : Ailerons 0 mm 
• Slow cruise : -2 mm 
• Thermal : - 4 mm 
• Airbrakes : -26 mm 

Elevator is trimmed for each flight mode. CG 64 mm from Leading edge .