MKS DS6188 Servo
MKS DS6188 Wing Servo
-
Dimensions0.90 x 0.47 x 1.07in <br>(23 x 12 x 27.25mm)
-
Torque32.9oz-in (2.37kg-cm) @4.8v<br>37.8oz-in (2.72kg-cm) @5.5v
MKS DS6188
The MKS DS6188 is the new F3X servo for V-tails. Once you've tried MKS, you will know you have tried the very best. Never has a servo been so accurate and tight, a servo we've all have been needing for our high performance gliders.
| Dead Band | 0.001ms (Default) | |
| Control System | +Pulse Width Control | |
| Working Frequence | 1520μs / 333hz | |
| (RX) Required Pulse | 3.0~5.0 Volt Peak to Peak Square Wave | |
| Operating Voltage | 4.8~6.0 V DC Volts | |
| Operating Temperature Range | -10 to + 60 Degree C | |
| Operating Speed (4.8V) | 0.073 sec/60° degrees at no load | |
| Operating Speed (6V) | 0.058 sec/60° dagrees at no load | |
| Stall Torque (4.8V) | 2.37 kg-cm (TBAoz/in) | |
| Stall Torque (6V) | 2.94 kg-cm (39.58oz/in) | |
| 360° Modifiable | YES | |
| Motor Type | DC motor | |
| Potentiometer Drive | Direct Drive | |
| Driver Type | FET | |
| Bearing Type | Dual Ball Bearings | |
| Gear Type | Chrome-Titanium alloy gear | |
| Programmable | NO | |
| Connector Wire Length | 20.0 cm (7.86 in) | |
| Dimensions | 23X12X27.25 mm (0.9X0.47X1.07 in) | |
| Weight | 17.45 g (0.61 oz) | |
|
Customers who bought this product also bought
Customers who viewed this product bought
