MKS DS95-MG Digital Servo
MKS DS95 MG
-
Weight(0.74 oz)
-
Dimensions0.9 X 0.47 X 1.07in <br> (23 X 12 X 27.25mm)
-
Torque33.88oz-in (2.44kg-cm) @4.8v<br> 42.36oz-in (3.05kg-cm) @6.0v
-
Speed0.066 sec/60° @ 4.8v<br> 0.053 sec/60° @ 6.0v
MKS DS95-MG
The MKS DS95 is one of the latest digital servos from MKS. Once you've tried MKS, you will know you have tried the very best. Never has a servo been so accurate and tight, a servo we've all have been needing for our high performance gliders. The DS95 has a full CNC Aluminum case that has been milled to the highest of tolerances.
DS95
Dead band: 0.001ms (Default)
Control System: +Pulse Width Control
Working frequencie: 1500μs / 333hz data: 850μs~2150μs
(RX) Required Pulse: 3.0~5.0 Volt Peak to Peak Square Wave
Operating Voltage: 4.8~6.0 V DC Volts
Operating Temperature Range: -10 to + 60 Degree C
Operating Speed (4.8V): 0.066 sec/60° degrees at no load
Operating Speed (6V): 0.053 sec/60° degrees at no load
Stall Torque (4.8V): 2.44 kg-cm (33.88oz/in)
Stall Torque (6V): 3.05 kg-cm (42.36oz/in)
360° Modifiable: YES
Motor Type: DC Motor
Potentiometer Drive: Direct Drive
Driver Type: FET
Bearing Type: Dual Ball Bearings
Gear Type: Chrome-Titanium alloy gear
Programmable: NO
Connector Wire Length: 20.0 cm (7.86 in)
Dimensions: 23X12X27.25 mm (0.9X0.47X1.07 in)
Weight: 21.21 g (0.74 oz)
|
