Bird 60" Sailplane
Exceptional quality! Made from CNC molds using fiberglass with carbon reinforcement in all the right spots. All control surfaces have wipers. The airfoil is a very slippery HN 354.
Wing Area356 sq in
Controls2 Ail + Elev & Rudder (opt)
Features1 piece wing, 1 piece tail, generous nose with canopy, preinstalled ballast tube, wipers on all control surfaces
Battery config1650 NiHM "AA" 4 cell
The Bird is one of our top offerings from CZ. This model is of exceptional quality, and compares with ANY of the class "A" models in the business. The model is from CNC molds, using fiberglass with carbon reinforcement in all the right spots. The ailerons are top hinged with wipers. The airfoil is a very slippery HN 354.
The fuse is a nice strong layup with a 14oz dia. ballast tube pre-installed under the wing. The canopy has the latch pre-installed! Unlike many 60 gliders, this fuse has ample room for two HS-85 sized servos, 8 channel receiver, and healthy sized 1650mah NiHM battery. The pushrods are preinstalled, and the horns on the V-tail are also preinstalled.
As you would expect of a model of this quality and completeness, the included hardware kit comes complete with wing bolts, custom servo covers, brass control horns for the wing, and even a hex key for the wing bolts!
The Bird takes the 60 class to a new level, until now only seen in the larger models. Do not wait to get you hands on one of these beauties. Experience has shown that these models sell out very quickly after each shipment!
Video by WAKUMANN