Vixen 2 F5J X-tail
Vixen 2 is a X-tail electric sailplane for F5J /LMR/ALES competition or sport flying available in three layups: Standard, Strong (windy), and Competition. You're going to fall in love with this easy to tune and fly high performance glider.
-
Wingspan144 in. (3.68m)
-
Wing Area1169 sq.in. (75.42dm2)
-
AirfoilProprietary-modified JW transitioning to modified Drela sections
-
Length68 in. (1.72m)
-
Weight42-50oz AUW
-
Motor typeNeu 1102/3y/6.7 gear motor
-
Battery config3s LiPo
-
Layup optionsStandard, Strong, Competition
Vixen 2 F5J X-tail
The Vixen 2 F5J is a proven model with an exceptional design pedigree.
By popular demand, we now offer an X-tail, 4pc wing, 2pc fuse compact version of the highly successful V-tail original!
The JW/Drela/DP wing section/planform is a good looking, great performing model that is perfect for F5J. The redesigned wing has been changed to a 4-servo design, but if you wish, there is an outer-tip servo bay in the wing for 6 servos. The wing has factory installed LDS linkages.
The large X-tail works very well at low speed, and with the polyhedral wing, and long tail moment, it translates to a very stable, predictable flying model that's very easy to tune up and reach maximum flight performance.
The signature Daryl Perkins inspired pre-hinged canopy on the Vixen 2 is a nice touch giving you easy access to all of your electric drivetrain components. In a very short time, you’ll be in the air, and you'll realize what an amazing world class F5J sailplane this is. Give us a call or e-mail us with any ordering or technical questions, we'll be happy to help you make the right equipment choices.
The Vixen 2 comes with:
- Hardware
- Pushrods installed wing/supplied for fuse
- Wing bags/tail bags
- LDS installed-flush mount
- Canopy hinges installed
- Ballast tubes in wing for up to 24 oz. of 9/16 ballast
The Vixen 2 F5J comes in three layups:
- Standard-Glass/carbon
- Strong (windy)-C68gsm Carbon
- Competition Strong/Lite (pictured)-Carboline 37gsm
Suggested Power Setup:
Motor: NeuMotor 1102/3.5Y/5.8 (P22)
Spinner: GM 30/6mm Spinner
Prop: GM 14x10 Prop
Battery: Tattu Battery 850mAh 3S 75C Lipo
Suggested Accessories:
Servos: MKS HV6100 MG six to eight are needed
Servo Frames: Servo Frames for DS6100 servos with bearings (pair), order two or more pairs
Firewall: PNC Alum Firewall 30mm for P22 or Powerline, one needed
|
|
|
