The MKS DS-6125E is part of the latest range from MKS.
Once you have tried MKS, you will know you have tried the very best!
Never has a glider servo been so accurate and tight! This is what we all have been searching for!!
The DS-6125E has a full CNC Aluminum case that has been milled to the highest of tolerances.
DS-6125E makes an excellent V-tail sailplane servo.
|
SKU |
RC-MKS-DS6125E |
|
Dead Band |
0.0008 ms |
|
Control System |
+Pulse Width Control |
|
Working Frequence |
1520μs / 333hz |
|
(RX) Required Pulse |
3.0~5.0 Volt Peak to Peak Square Wave |
|
Operating Voltage |
4.8~6.0 V DC Volts |
|
Operating Temperature Range |
-10 to + 60 Degree C |
|
Operating Speed (4.8V) |
0.066 sec/60° degrees at no load |
|
Operating Speed (6V) |
0.053 sec/60° degrees at no load |
|
Stall Torque (4.8V) |
2.58 kg-cm (35.83 oz/in) |
|
Stall Torque (6V) |
3.25 kg-cm (45.13 oz/in) |
|
360° Modifiable |
Yes |
|
Motor Type |
DC Motor |
|
Potentiometer Drive |
Direct Drive |
|
Driver Type |
FET |
|
Bearing Type |
Dual Ball Bearings |
|
Gear Type |
Chrome gear |
|
Programmable |
No |
|
Connector Wire Length |
15.0 cm (5.89 in) |
|
Dimensions |
23X12X27.25 mm (0.9X0.47X1.07 in) |
|
Weight |
21.21 g (0.74 oz) |
