The Bird-E is 60-inch model is of exceptional quality from CNC molds that is great for slope flying or flat field soaring.
Wing Area356 sq in
ControlsAil, Elev, Flap, Rudder,Thro
Features1 piece wing, 1 piece tail, removable nose access
Using fiberglass with carbon reinforcement in all the right spots. All control surfaces have wipers. The airfoil is a very slippery HN 354.
The Bird E is one of our most exciting additions from CZ. This model is of exceptional quality, and compares with ANY of the class "A" models in the business. The model is from CNC molds, using fiberglass with carbon reinforcement in all the right spots. The ailerons are top hinged with wipers. The airfoil is a very slippery HN 354.
The fuse is a nice strong layup with a 14oz dia. ballast tube pre-installed under the wing. The canopy is natural carbon fiber, and has the latch pre-installed! Unlike many 60 gliders, this fuse has ample room for gear. The pushrods are preinstalled, and the horns on the V-tail are also preinstalled.
As you would expect of a model of this quality and completeness, the included hardware kit comes complete with wing bolts, custom servo covers, brass control horns for the wing, and even a hex key for the wing bolts!
The Bird E takes the 60 class to a new level, until now only seen in the larger models.
Recommended Gear: Not included
Esc: Castle Edge Lite 50/ Castle Edge Lite 100
Prop/Spinner: RFM 13x9 38/4mm spinner/ RFM 14.5x10slim 38/6mm spinner
Servos: MKS DS 6100 All Surfaces
Harness: RCHarness 1.5 Meter 1pc molex
Video by Davey Orr FPV (Carbon Version of Bird E)